|Grade||Genuine Rolex||AAAAA Clone||AAA Replica||A Replica|
|Movement||Rolex Calibre 3135||Genuine Swiss Clone 3135 movement||Swiss 2836 Movement||Asian 2813 Movement|
|Time Accuracy||-3/+5 sec per day COSC certified||-5/+6 sec per day COSC certified||-10/+10 sec per day COSC certified||-1/+2 min per day COSC certified|
|Stainless Steel Type||904L Stainless Steel||904L Stainless Steel||316L Stainless Steel||316L Stainless Steel|
|Crystal||Sapphire crystal||Sapphire crystal correct date magnification||Sapphire crystal||Mineral Glass|
|Logo & Markings||laser etchings||Exact on entire watch||90% Exact on entire watch||70% Exact on entire watch|
|Dial||Genuine Rolex||Exact detail and font||90% exact detail and font||70% Exact detail and font|
|Luminous Markers||Rolex Lumen||SuperLuminova Swiss Lumen||Swiss Lumen||Normal Lumen|
|Waterproof||100m on standard models||Tested up to 300m||Tested up to 30m||Life waterproof|
|Life expectancy||Lifetime||Lifetime||3-5 years||1-2 years|
|Warranty||2 Years||Up to 5 Years||Up to 3 Years||Up to 1 Years|
Band Material: 316L. The raw material for this band is 316L steel, which is a very strong and corrosion-resistant steel. It has the same strength as the most popular grades (HRC52, HRC55), but only half the weight. Compared with competitors, the production cost of stainless steel is also higher.
Watch Case: 316L. The material in this case comes from 316L, which can help to form a corrosion protection film on the surface of the metal material.
Case Back: Solid. The sturdy case back can transmit impact better than the plastic case back.
Crystal: Sapphire Crystal. The sapphire crystal mirror has a special anti-reflective coating to minimize light reflection and provide scratch resistance without affecting its brightness. Tips: The A Replica is applied with mineral glass instead of sapphire.
Second Markers: Minute Markers around the outer rim. The second hand of the watch is designed as shown in the picture above, with minute markers on the outer edge, as shown in the picture above.
Dial Markers: Dot. The replica watch uses a dot as a dial marker are used as markers instead of Roman numerals can impact the look of the dial.
Bezel Material: Stainless Steel. A stainless steel bezel has been around since ancient times. It has been used as a decorative material for watches and clocks for more than two thousand years. A watch face made from stainless steel bezel materials can withstand extreme temperatures.
Clasp: Fold Over Clasp. Our watch uses a folding buckle, to make it easier and quicker for the user to open and fold the case over to keep it secure.
Water Resistance: 30 meters. About the watch, the waterproof depth is 30 meters, which is similar as real watch. Tips: The A Replica is just daily waterproof, need to purchase additional waterproof service which is up to 30 meters.
1:1 Clone, Top 1:1 Clone, A Replica, AAA Replica, AAAAA Clone